您是否正受到短信簽名報備的困擾？達信通解決方案讓您最快15分鐘內恢復信息傳遞，馬上
ASP
ASP代碼示例
<%@LANGUAGE="VBSCRIPT" CODEPAGE="936"%>
<%
'接口類型：達信通觸發短信接口，支持發送驗證碼短信、訂單通知短信等。
'賬戶注冊：請通過該地址開通賬戶http://sms.wx96.com/register.html
'注意事項：
'（1）調試期間，請用默認的模板進行測試，默認模板詳見接口文檔；
'（2）請使用 用戶名(例如：cf_demo123) 及 APIkey來調用接口，APIkey在會員中心可以獲取；
'（3）該代碼僅供接入達信通短信接口參考使用，客戶可根據實際需要自行編寫；
Response.Charset = "gb2312"
'asp UTF轉GB2312 將UTF8編碼文字轉換為GB編碼文字的asp代碼
function UTF2GB(UTFStr)
for Dig=1 to len(UTFStr)
'如果UTF8編碼文字以%開頭則進行轉換
if mid(UTFStr,Dig,1)="%" then
'UTF8編碼文字大于8則轉換為漢字
if len(UTFStr) >= Dig+8 then
GBStr=GBStr & ConvChinese(mid(UTFStr,Dig,9))
Dig=Dig+8
else
GBStr=GBStr & mid(UTFStr,Dig,1)
end if
else
GBStr=GBStr & mid(UTFStr,Dig,1)
end if
next
UTF2GB=GBStr
end function
'GB2312轉UTF8的asp代碼 將GB編碼文字轉換為UTF8編碼文字
Function toUTF8(szInput)
Dim wch, uch, szRet
Dim x
Dim nAsc, nAsc2, nAsc3
'如果輸入?yún)?shù)為空，則退出函數
If szInput = "" Then
toUTF8 = szInput
Exit Function
End If
'開始轉換
For x = 1 To Len(szInput)
'利用mid函數分拆GB編碼文字
wch = Mid(szInput, x, 1)
'利用ascW函數返回每一個GB編碼文字的Unicode字符代碼
'注：asc函數返回的是ANSI 字符代碼，注意區別
nAsc = AscW(wch)
If nAsc < 0 Then nAsc = nAsc + 65536
If (nAsc And &HFF80) = 0 Then
szRet = szRet & wch
Else
If (nAsc And &HF000) = 0 Then
uch = "%" & Hex(((nAsc \ 2 ^ 6)) Or &HC0) & Hex(nAsc And &H3F Or &H80)
szRet = szRet & uch
Else
'GB編碼文字的Unicode字符代碼在0800 - FFFF之間采用三字節模版
uch = "%" & Hex((nAsc \ 2 ^ 12) Or &HE0) & "%" & _
Hex((nAsc \ 2 ^ 6) And &H3F Or &H80) & "%" & _
Hex(nAsc And &H3F Or &H80)
szRet = szRet & uch
End If
End If
Next
toUTF8 = szRet
End Function
'二進制轉換為十六進制的asp代碼
function c2to16(x)
i=1
for i=1 to len(x) step 4
c2to16=c2to16 & hex(c2to10(mid(x,i,4)))
next
end function
'二進制轉換為十進制的asp代碼
function c2to10(x)
c2to10=0
if x="0" then exit function
i=0
for i= 0 to len(x) -1
if mid(x,len(x)-i,1)="1" then c2to10=c2to10+2^(i)
next
end function
'十六進制轉換為二進制的asp代碼
function c16to2(x)
i=0
for i=1 to len(trim(x))
tempstr= c10to2(cint(int("&h" & mid(x,i,1))))
do while len(tempstr)<4
tempstr="0" & tempstr
loop
c16to2=c16to2 & tempstr
next
end function
function c10to2(x)
mysign=sgn(x)
x=abs(x)
DigS=1
do
if x<2^DigS then
exit do
else
DigS=DigS+1
end if
loop
tempnum=x
i=0
for i=DigS to 1 step-1
if tempnum>=2^(i-1) then
tempnum=tempnum-2^(i-1)
c10to2=c10to2 & "1"
else
c10to2=c10to2 & "0"
end if
next
if mysign=-1 then c10to2="-" & c10to2
end function
'UTF8編碼文字將轉換為漢字
function ConvChinese(x)
A=split(mid(x,2),"%")
i=0
j=0
for i=0 to ubound(A)
A(i)=c16to2(A(i))
next
for i=0 to ubound(A)-1
DigS=instr(A(i),"0")
Unicode=""
for j=1 to DigS-1
if j=1 then
A(i)=right(A(i),len(A(i))-DigS)
Unicode=Unicode & A(i)
else
i=i+1
A(i)=right(A(i),len(A(i))-2)
Unicode=Unicode & A(i)
end if
next
if len(c2to16(Unicode))=4 then
ConvChinese=ConvChinese & chrw(int("&H" & c2to16(Unicode)))
else
ConvChinese=ConvChinese & chr(int("&H" & c2to16(Unicode)))
end if
next
end function
'GB2312中文轉unicode(&#)的asp代碼 將GB編碼文字轉換為unicode編碼文字
function chinese2unicode(Str)
dim i
dim Str_one
dim Str_unicode
if(isnull(Str)) then
exit function
end if
for i=1 to len(Str)
Str_one=Mid(Str,i,1)
Str_unicode=Str_unicode&chr(38)
Str_unicode=Str_unicode&chr(35)
Str_unicode=Str_unicode&chr(120)
Str_unicode=Str_unicode& Hex(ascw(Str_one))
Str_unicode=Str_unicode&chr(59)
next
chinese2unicode=Str_unicode
end function
'URL地址編碼解碼函數
Function URLDecode(enStr)
dim deStr
dim c,i,v
deStr=""
for i=1 to len(enStr)
c=Mid(enStr,i,1)
if c="%" then
v=eval("&h"+Mid(enStr,i+1,2))
if v<128 then
deStr=deStr&chr(v)
i=i+2
else
if isvalidhex(mid(enstr,i,3)) then
if isvalidhex(mid(enstr,i+3,3)) then
v=eval("&h"+Mid(enStr,i+1,2)+Mid(enStr,i+4,2))
deStr=deStr&chr(v)
i=i+5
else
v=eval("&h"+Mid(enStr,i+1,2)+cstr(hex(asc(Mid(enStr,i+3,1)))))
deStr=deStr&chr(v)
i=i+3
end if
else
destr=destr&c
end if
end if
else
if c="+" then
deStr=deStr&" "
else
deStr=deStr&c
end if
end if
next
URLDecode=deStr
end function
'判斷是否為有效的十六進制代碼
function isvalidhex(str)
dim c
isvalidhex=true
str=ucase(str)
if len(str)<>3 then isvalidhex=false:exit function
if left(str,1)<>"%" then isvalidhex=false:exit function
c=mid(str,2,1)
if not (((c>="0") and (c<="9")) or ((c>="A") and (c<="Z"))) then isvalidhex=false:exit function
c=mid(str,3,1)
if not (((c>="0") and (c<="9")) or ((c>="A") and (c<="Z"))) then isvalidhex=false:exit function
end function
'請求數據到短信接口
Function Post(url,data)
dim Https
set Https=server.createobject("MSXML2.XMLHTTP")
Https.open "POST",url,false
Https.setRequestHeader "Content-Type","application/x-www-form-urlencoded"
Https.send data
if Https.readystate=4 then
dim objstream
set objstream = Server.CreateObject("adodb.stream")
objstream.Type = 1
objstream.Mode =3
objstream.Open
objstream.Write Https.responseBody
objstream.Position = 0
objstream.Type = 2
objstream.Charset = "utf-8"
Post = objstream.ReadText
objstream.Close
set objstream = nothing
set https=nothing
end if
End Function
'函數返回隨機整數。
Function gen_key(digits)
'Create and define array
dim char_array(50)
char_array(0) = "0"
char_array(1) = "1"
char_array(2) = "2"
char_array(3) = "3"
char_array(4) = "4"
char_array(5) = "5"
char_array(6) = "6"
char_array(7) = "7"
char_array(8) = "8"
char_array(9) = "9"
'Initiate randomize method for default seeding
randomize
'Loop through and create the output based on the the variable passed to
'the function for the length of the key.
do while len(output) < digits
num = char_array(Int((9 - 0 + 1) * Rnd + 0))
output = output + num
loop
'Set return
gen_key = output
End Function
Dim mobile
mobile = request("mobile") '登錄用戶名
if mobile="" then
response.Write("手機號碼不能為空")
else
if request.Form("send_code") = "" or Session("send_code")<>request.Form("send_code") then
'防用戶惡意請求
response.Write("請求超時，請刷新頁面后重試")
else
dim target,post_data,content,res,mobile_code
mobile_code = gen_key(4)
Session("mobile_code") = mobile_code
'Response.Cookies("mobile_code") = mobile_code
Session("mobile") = mobile
'Response.Cookies("mobile") = mobile
target = "http://106.wx96.com/webservice/sms.php?method=Submit"
content = toUTF8("您的驗證碼是："&mobile_code&"。請不要把驗證碼泄露給其他人。")
post_data = "account=用戶名&password=密碼&mobile="&mobile&"&content="&content
'用戶名是登錄wx96.com賬號名（例如：cf_demo123）
'查看密碼請登錄用戶中心->驗證碼、通知短信->帳戶及簽名設置->APIKEY
'Response.write toUTF8("短信測試")
'response.Write(UTF2GB(Post(target,post_data)))
tempstr = UTF2GB(Post(target,post_data))
'if instr(tempstr,"提交成功")>0 Then
'response.Write("true")
'else
'response.Write("error")
'end if
Dim len1,len2
len1 = instr(1,tempstr,"/code>",1)-1
len2 = instr(1,tempstr,"code>",1)
'response.Write(len2)
code=left(tempstr,len1)
code=right(code,(len1-len2-5))
'response.Write(code)
Dim len3,len4
len3 = instr(1,tempstr,"/msg>",1)-1
len4 = instr(1,tempstr,"msg>",1)
'response.Write(len2)
msg=left(tempstr,len3)
msg=right(msg,(len3-len4-4))
response.Write(msg)
end if
end If
%>
